Fallen Statue

So here's a shot of the soft plastic Egyptian figures I bought for a few dollars, most are about 4 inches high, lack detail and garish paint job. Perfect for a statue though.

Nest shot has a plastic base left over from some desert placards. Plastic shrimp cup inverted and hot glued. One of the figures has been cut up, collapsed as it were, and hot glued down. I left a bit more of the legs on the original base to make it obvious, something broke off. The eye can follow along either way and see what has befallen the statue..

A quick base coat to highlight the broken bits of the statue. Probably paint the broken statue in an off white, or in weathered garish colors, most statues had been painted originally. Sand drift to build up and cover a little of the broken bits I think.

New Web Comic

Well not new, but new to me, RRsize showed to me, I'm hooked:

http://freefall.purrsia.com/

New Ground Cover Bits

So I found some new plastic plant material at the local Joann's Crafts and got to work on assembling some leafy bush bits for scattering on the game field where appropriate.

First shot is the Leafy basics with flowers etc dropped on to the work table. Next are a sample set of cuttings trimmed off with a pair of scissors, its very soft plastic, color is not bad at all. Time to break out the Hot glue gun, some small plastic cut bases.

So dab of hot glue, add another bit of the foliage, dab and add about 5 times. Next Flock some of the small plastic bases. Painted them Green and put out side to dry for about 10 minutes, apply white pva glue, dip into the Flock tub, lightly press the flock into the glue and let dry for an hour under a hot light lamp.  When the base is ready, I take up the created bush and hot glue it to the stand. Adding some other types of weedy bits, small rocks and the like spice it up nicely.

Until you get several of them done as pictured to the left with a 28mm figure for comparison. Not much time to whip up couple dozen bits.

And there you have it.

Easy Trees to Make Mark II

Been some time since my first tree making article and techniques have improved. So with that in mind I gathered the materials to make a new and improved easy tree.

So first the supplies to be used include Clump Foliage, 16D nail, thin plastic base painted a dark green color, some Ground Cover and Grass Material along with some thin twigs from a tree outside donated, white glue and a hot glue gun. I painted the nails a dark brown. Yes, I know most tree trunks actually look gray for the most part but I am a convert to the Hollywood approach, model what you see in the movies and people tend to like it better than having to explain why I did it the natural way.

Next I affix the nail to the base with the hot glue gun. Hot glue is Under the head and smashed against the base, held to cool solid. Then I put the tip of the gun against the trunk, apply a lot of glue and then slowly move it away from the trunk, weaving along a bit and drawing it out. This makes nice Roots for the tree and reinforces the adhesion of the nail to the base. The miniature is a 28mm figure, ACW I do believe, put in for scale reference.

Here I am slapping some paint on the dried hot glue, it takes only moments for it to cool completely. I do not have to be to careful about getting it on the base as I will be gluing the flock to the base right up to the roots, which covers the over paint nicely. I also painted up the base some so the colors are matching, though to tell, it  would be pretty difficult to the eye to tell them apart with out holding it up to the sunlight and looking closely under the tree.

Next I have taken one block of the Clump Foliage and torn it into 4 pieces, each one slightly smaller than the one before. I do not tear them into flat pancakes, rather irregular shapes as they will not be reassembled on the nail so they fill out more space more easily. I will use some small bits from another cube of foliage later to help fill in places that the eye determines needs some help.

First piece is stabbed onto the nail, the largest piece first. It is roughly centered in the widest area of the foliage clump. Do not worry about things sticking out at this point, trimming comes later on. I did not put any glue on the nail either at this point.

Moving along each clump gets stuck on top of the other. Turn the clumps so they are random yet spread coverage out in all directions.  The top most piece gets placed after a goodly bit of hot glue is applied to the last 1/2 inch of the nail head, all around the shaft. The last piece is pushed down and held for a few moments till the hot glue cools and takes hold. Do not rush the cool down time or the piece may still curl up and barely be hanging on. I used a nail with out a base to take pictures with, usually I only use the based nails to assemble trees. 

Here is the rough of the tree on its base, all its chunky bits sticking out all over, little or no rhyme or reason appearing to it. No worries, next is trimming and shaping.

If you want you can snip or use both hands to grip and pull off odd chunks that are not looking appropriate. Do not get overly concerned if you pull a bit off here or there that you realize really did look better. Hot Glue to the Rescue. Use a glob about the size of a pencil erasure to adhere the 2 sections back together.

Okay so here is something new. Taking small sticks from a tree outside, I broke off bits about 2 inches long. The one nearest the tree base has had hot glue smeared on about a 1/2 inch and then a piece of clump foliage stuck right on and cooled. These pieces are for the newer growth on the tree and can be stuck into depressions or where ever suits your artistic eye to add a bit more fill in. Leave some of the stick showing also. A few of the sticks can be lifted and stuck between overhanging pieces of clump foliage to make it look like branches pushed up into each other.

Fun time with PVA white glue. I used a squeeze bottle to lay some trails of glue, and then a old brush to spread it around under the canopy of the tree. Look down on your tree to make sure your getting it to the outer edges where the bulk of leaves and dead branches would fall.

Here is the Flock applied, pressed down and the excess tapped off. I found the really nice dead wood piece in the bottle of Flock material, which I had to open and pour about 1/4 of it into a small bowel and mix it up. Transport and shaking over time had moved the finer material to the bottom of the shaker bottle and the coarse dead wood material to the top of the shaker bottle.

Final step was to use the Grass Material around the edges of the dead wood Flock. Some trees I do darker dead wood flock with more tan colors for dead leaves, especially if the tree will be one of several on a larger joint base. Do remember to brush flock off the top of the major ground roots for a better visual effect.

 And here is the final shot of the new tree. Excluding the time to pose and take shots, probably spent about 5 minutes assembling the entire tree after the paint dried on the nails and gathered everything together. From that point assembling many trees is very easy.

Working up My Tools and Materials listings

Bah, taking time to catalogue the usual materials so I can do in blog links to a reference post as to what it is to save on retelling what Kel Seal is or what type of flocking etc that I use. Nothing exciting here but I think the time spent will help keep my posts a bit more informative.

Grass Material

More of the Woodland Scenics materials. This time their grass and field flock. Have had excellent results with them over the years. Price is reasonable and I do go through quiet a bit of it when doing a new mat or terrain piece. I keep quiet a variety of colors on hand for any sudden terrain ideas I come up with.

Flock and Turf Ground Cover

Really useful material to fill in open woods or even simulate lots of dead wood brush areas. Also a Woodlands Scenics product. Apply liberal amount of pva glue to the base and shake it on from the bottle, let it dry and tap off the rest. The wood chips and chopped twigs give lots of character to my woodland pieces.