Wednesday, February 26, 2014

Device MX2

Had to get cracking on the tunneler for the Chapter final scenario! A basic shape cut from a large tin can covered in cardboard strips and LOTS of rivets.
This shot is of the inside and side Panels, plut the rough top piece. Next is progress made.
Here is the basic body form, rising from the ground. The front "rotating plate is attached.
Here we have the Screw Blades attached to the cone and its all lined up, hit it with a light coat of black. Will be doing the dirt piles/debris under and around the cone for the final piece. Couple of side hatches to do yet and of course lots more painting. As to the size, well, villains Always Super Size their fiendish devices! Mahahahha..... er and the concludes the report sir...

1 comment:

  1. That is one of the coolest homemade vehicles I've ever seen.

    ReplyDelete