Got the penultimate CoC encounter creature at the swap meet, forgot to get him out of the trunk;
Total purchase price 20$
Monday, March 29, 2010
Sunday, March 28, 2010
Painting Table, WIP new stuff
Ok, so thinking I was done with D&D collectable figures as most that I might want to have purchased were from 6 to 30 dollar ones, some with no good reason for the price other than "its a rare" to justify the price for them. So at a swap meet a guy hauls out a couple of totes of figs and I dive in. Heres what I got for 30 dollars.
By my rough count vs the on line best prices I could find, I saved about 150 dollars and shipping while on a trip to visit the grandkids :)
By my rough count vs the on line best prices I could find, I saved about 150 dollars and shipping while on a trip to visit the grandkids :)
Friday, March 26, 2010
WIP rock faces
Getting some materials cast up for steep impassable rock face cliff sides for my desert boards:
Used up a lot of fast curing resin that was not really suitable for the small item casting I typically do.
Used up a lot of fast curing resin that was not really suitable for the small item casting I typically do.
Wednesday, March 17, 2010
Doctor Howlers Elite, pulp action figures
Ok, time for some bio-suit baddies:
Doctor Howlers experiment worked.. all to well.. on him. He is undecided on whether or not to exspose his Elite Guardsmen to his new bio weapon yet. In the mean time his made experiments go on!
Worked on the suit color some, the plain mustard yellow was not quiet what I had in mind.
Doctor Howlers experiment worked.. all to well.. on him. He is undecided on whether or not to exspose his Elite Guardsmen to his new bio weapon yet. In the mean time his made experiments go on!
Worked on the suit color some, the plain mustard yellow was not quiet what I had in mind.
Tuesday, March 16, 2010
Clockwork Black Smoke Projector Unit
Still working on the bases, whats new about that, heh.
Still working on the bases of course. Original figure is a D&D Hammerer with a large metal hammer raised up over its head. I have clipped the hammer off, removed the most of the handle, added the metal bead Cone to the haft of the hammer. Then pin and mount to the shoulder of the figure as its primary weapon. On its opposite shoulder, the remains of the original shaft of the hammer has been converted for use as a shoulder point defense weapon of some sort, technical reports have not been released on that item nor could the investigative reporters obtain any leads on it. For its final line of defense is a mechanical claw for those brave enough or.. foolish enough to press into hand to hand range.
Still working on the bases of course. Original figure is a D&D Hammerer with a large metal hammer raised up over its head. I have clipped the hammer off, removed the most of the handle, added the metal bead Cone to the haft of the hammer. Then pin and mount to the shoulder of the figure as its primary weapon. On its opposite shoulder, the remains of the original shaft of the hammer has been converted for use as a shoulder point defense weapon of some sort, technical reports have not been released on that item nor could the investigative reporters obtain any leads on it. For its final line of defense is a mechanical claw for those brave enough or.. foolish enough to press into hand to hand range.
Monday, March 15, 2010
Painting Table, Current WIP
Thought it was time to post an update of my Works in Progress. Some got pushed back, others moved forward as all the Cyborgs, Asain Women and some fantasy magic users got completed.
Egyptian Statues, Insectoids for Mi-Go in CoC, Pegasus units for an FR army, Street thugs moved up, still stuck on colors for the bio suited mustard yellow guys in the back. Finished up all the Cyborgs and Asian Women plus some fantasy casters.
Egyptian Statues, Insectoids for Mi-Go in CoC, Pegasus units for an FR army, Street thugs moved up, still stuck on colors for the bio suited mustard yellow guys in the back. Finished up all the Cyborgs and Asian Women plus some fantasy casters.
Sunday, March 14, 2010
Defense Entrenchments
The Battle for Hythoria looms and no defensive works are ready for the game table! Since its not really possible to dig trenches into a solid game table top, and not create a mess to be dealt with later I worked up the usual type of "entrenchments. An old yard stick was cut into 3 pieces, another square cut piece of wood was hot glued onto the back, and everything sanded down.
The backing for the Entrenchments is made from coffee stir sticks and were hot glued, lightly, into place for the bottom 2 rows. This brought the top of the boards even with the larger piece of wood that is the stabilizing strength of the piece. Next the upright posts were hot glued in lightly, not with globs as it would push past and have to be trimmed off to get it to look right, so a bit of extra care and it comes out rather well. I did up 3 pieces at the same time, it all went rather quickly.
Here is a shot of the front slope of the entrenchment filled in with some smooth Kel Seal chunked on and roughly smoothed out. I let this all dry for an hour so that the surface would be firm before I applied the textured Kel Seal top coat. A British Sailor 28mm is for size reference.
Textured coat of Kel Seal applied, and while still damp, I stuck pebbles and bits of rock into the facings for a bit of "make it look more like dirt" effect. Leaving them to dry for an entire day, though... possibly in the very bottom inside corners it may only turn into a rubbery gel... but the outer surface will be hardened several mm's deep. The wood bracing interior will soak up some of the moisture and harden the Kel Seal on the inside also. Am seriously thinking of shooting a mold of one of them and using it to cast up a lot of resin copies to cut up and make double sided trench pieces and some end pieces. Hmm some sanding and such could angle cut some to make gun emplacements also.... So many options.
The backing for the Entrenchments is made from coffee stir sticks and were hot glued, lightly, into place for the bottom 2 rows. This brought the top of the boards even with the larger piece of wood that is the stabilizing strength of the piece. Next the upright posts were hot glued in lightly, not with globs as it would push past and have to be trimmed off to get it to look right, so a bit of extra care and it comes out rather well. I did up 3 pieces at the same time, it all went rather quickly.
Here is a shot of the front slope of the entrenchment filled in with some smooth Kel Seal chunked on and roughly smoothed out. I let this all dry for an hour so that the surface would be firm before I applied the textured Kel Seal top coat. A British Sailor 28mm is for size reference.
Textured coat of Kel Seal applied, and while still damp, I stuck pebbles and bits of rock into the facings for a bit of "make it look more like dirt" effect. Leaving them to dry for an entire day, though... possibly in the very bottom inside corners it may only turn into a rubbery gel... but the outer surface will be hardened several mm's deep. The wood bracing interior will soak up some of the moisture and harden the Kel Seal on the inside also. Am seriously thinking of shooting a mold of one of them and using it to cast up a lot of resin copies to cut up and make double sided trench pieces and some end pieces. Hmm some sanding and such could angle cut some to make gun emplacements also.... So many options.
Subscribe to:
Posts (Atom)
